TM 11-6625-3081-23
7-37. TEMPERATURE SENSORS
7-37
INPUT CODE:
AUGTEM (cont)
a. DESCRIPTION (cont)
The nightside test bench thermal source controller ambient temperature sensor is
checked for a 17.0° to 29.0°C indication.
The indication is recorded and used as a
base for other nightside test bench sensor tests.
If the indication is not within limits, a prompt is displayed, and a 22°C
ambient temperature assumed in all other tests.
The A source is programmed to ambient and the A auxiliary-temperature sensor
checked for an indication from
-5.0° to +1O.O°C of the recorded ambient temperature
indication.
If the indication is not within limits, a prompt is displayed.
The B source is programmed to ambient and the B auxiliary temperature sensor is
checked for an indication from -5.0 to +lO.O°C of the recorded ambient indication.
If the indication is not within limits, a prompt is displayed.
The C source is programmed to ambient, and the C auxiliary temperature sensor
checked for an indication from -5.0° to +10.0°C of the recorded ambient
temperature.
If the indication is not within the limits, a prompt is displayed.
The A source is programed to ambient and the A controller temperature sensor
checked for an indication from
-5.0° to +lO.O°C of the recorded ambient
temperature.
If the indication is not within limits,
a prompt is displayed.
The B source is programmed to ambient, and the B controller temperature sensor
checked for an indication from
-5.0° to +1O.O°C of the recorded ambient
temperature.
If the indication is not within limits,a prompt is displayed.
The C source is programmed for ambient and the C controller temperature sensor
checked for an indication from -5.0° to +lO.O°C of the recorded ambient
temperature.
If the indication is not within limits, a prompt is displayed.
The A source is programmed to 30°C.
The A controller sensor is checked, after a
200-second delay, for an indication of 29.0° to 31.O°C.
If the indication is not within limits, a prompt is displayed.
7-188
