TM 11-6625-3081-23
6-4. MAJOR TEST ADAPTER REPAIR (cont)
6-4
11. RESISTOR R1 REPLACEMENT
REMOVAL
a.
Rotate three turnlock fasteners
(1) counterclockwise and open
circuit card cover assembly (2).
b. Unsolder and remove resistor R1
(3).
INSTALLATION
c.
Install resistor R1 by connecting
R1 between pins 1-97 and 1-103 on
the motherboard.
d.
Close circuit card cover assembly
(2) and push and rotate three
turnlock fasteners (1)
clockwise.
END OF TASK
12. WIRING AND CONNECTOR
REPAIR/REPLACEMENT
Repair or replace wires and
connectors using standard maintenance
practices. For the major test adapter
wire list refer to paragraph 3-31.
END OF TASK
6-11
