TM 11-6625-3081-23
6-8
TERMINAL BOX ASSEMBLY 13082747 REPAIR
6-8
This task covers:
Para
10
2.
3.
Item
Resistor R1, R2, R3, or R4
replacement
Stud terminal E1 through E8
replacement
Wiring and connector
repair/replacement
INITIAL SETUP
Materials (appendix C)
Personnel Required
39B ATE Repairer
1. RESISTOR R1, R2, R3, or R4
REPLACEMENT
REMOVAL
NOTE
This procedure is used to replace any
of four resistors.
a.
Remove four screws (1), lock-
washers (2), washers (3), and
cover (4).
b. Tag and remove wires and defec-
tive resistor (5) from resistor
stud terminals.
INSTALLATION
c.
Install in reverse order of
removal.
END OF TASK
6-14.3
