TM 11-6625-3081-23
6-4. MAJOR TEST ADAPTER REPAIR (cont)
6-4
INSTALLATION
e. Install in reverse order of
removal.
END OF TASK
5. SWITCH S1 OR S3 REPLACEMENT
NOTE
This procedure is used to replace
switch S1 or S3.
REMOVAL
a. Rotate three turnlock fasteners
(1) counterclockwise and open the
circuit card cover assembly (2).
b.
c.
Remove two screws (3), lockwash-
ers (4), and nuts (5).
Tag and unsolder wires from two
contacts (6) and remove switch
(7).
INSTALLATION
d. Install in reverse order of
removal.
END OF TASK
6-6