INSTALLATION - TM-11-6625-3081-23-4

REMOVAL - TM-11-6625-3081-23-4_83

INSTALLATION (cont) - TM-11-6625-3081-23-4_85

TM-11-6625-3081-23-4 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual
Page Navigation
36

TM 11-6625-3081-23 5-6. BASE ASSEMBLY REPAIR (cont) 5-6 (4) Remove piston plate (8) from isolator (1). (5) Remove tubing clamps as necessary. (6) Mark a line around bottom of isolator (l). Replacement isolator must be installed in same position. (7) Remove two bolts (9), lock- washers (10), and isolator (1). (8) Remove four screws (11) and valve assembly (12) from isolator (1). (9) Remove fitting (7) from defective isolator and clean teflon tape residue from threads. INSTALLATION (10) Wrap teflon tape around threads of fitting (7). (11) Install fitting (7) into replacement isolator (1). 5-19

Privacy Statement
Press Release
Contact