TM 11-6625-3081-23
5-31. TEST CONSOLE TEST BENCH 2A2 CABINET REPAIR (cont)
5-31
2. CABLE CARRIER REPLACEMENT
REMOVAL
NOTE
This procedure is used to replace any
of nine cable carriers.
Mounting
shown is typical for all carriers.
a.
b.
c.
d.
On cable carrier (1), clip lacing
tape (2) as required.
Remove nuts (3), lockwashers (4),
washers (5), screws (6), and
cable clamps (7).
Remove two nuts (8), three
washers (9), screw (10), and
chain (11).
Remove two screws (12),
lockwashers (13), washers (14),
and defective cable carrier (1).
INSTALLATION
e. Install in reverse order of
removal.
END OF TASK
5-137
