TM 11-6625-3081-23
5-30. TEST CONSOLE TEST BENCH 2A2 REPLACEMENT (cont)
5-30
7.
Test console test bench is now ready
for movement. Refer to
TM 11-6625-3085-30.
INSTALLATION
8.
Position test console test bench over
base assembly and install two bolts
(18) and washers (19) through base at
rear.
9.
Install two bolts (6) and washers (7)
through base at front.
10. Remove rolalift from test console
test bench.
Torque bolts (18) and (6) to
60 ft-lb.
12. Position two jacks (20) under center
of base.
Position jack levers (21)
to the up position and insert jack
handles (22).
5-133
