TM 11-6625-3081-23
5-27. HARNESS ASSEMBLY REPAIR (cont)
5-27
6. CONNECTOR J5 REPLACEMENT
REMOVAL
a.
Remove CCA A14.
b.
Disconnect connector P5 (2) from
connector J5 (3) by loosening
two screwlocks (1).
c.
Remove connector J5 (3) from
bracket (6) by removing two
screws (4) and washers (5).
NOTE
Move connector J5 into forward
compartment for easier access.
d.
Remove connector J5 (3) from
wiring harness.
INSTALLATION
e.
Install connector J5 (3) on
wiring harness.
f.
Install connector J5 (3) on
bracket (6) using two screws (4)
and washers (5).
9*
Connect connector J5 (3) to
connector P5 (2) and tighten two
screwlocks (1).
h.
Install CCA A14.
END OF TASK
5-122.4
Change 9
