TM 11-6625-3081-23
5-27.
HARNESS ASSEMBLY REPAIR (cont)
4.
CONNECTOR XA13, XA14, OR XA15
REPLACEMENT
NOTE
This procedure is for replacing con-
nector XA15 (5) and can also be used
for replacing connector XA13 (3) or
XA14 (4).
REMOVAL
a.
Remove top assembly cover
(para 5-26 task 2).
NOTE
To gain access to connectors XA13,
XA14, or XA15, the applicable CCA
must be removed.
To replace connector
Remove CCA
XA13 (3)
A13
XA14 (4)
A14
XA15 (5)
A15
b.
Remove applicable CCA.
c.
Remove faulty connector from
chassis assembly by removing two
screws (1) and washers (2).
d.
Remove faulty connector from
wiring harness.
INSTALLATION
e.
Install connector on wiring
harness.
f.
Install connector in chassis
assembly using two screws (1) and
washers (2).
g.
Install applicable CCA A13, A14,
or A15.
h.
Install top cover assembly (para
5-26 task 2).
END OF TASK
5-27
5-122.2 Change 9
