TM 11-6625-3081-23
2-17. OPERATOR INSTRUCTION MESSAGES (cont)
2-17
6. CONNECT DC POWER INPUT OF CURRENT
PROBE AMPLIFIER TO DC POWER OUTPUT OF
POWER SUPPLY FOR TYPE 134 (015-0058-01).
7. CONNECT AC POWER CORD PLUG OF POWER
SUPPLY INTO E/O BENCH A2A4J3 (26).
8. CONNECT P1 OF CABLE 13081706 T0
PROGRAMMABLE DIGITIZER CHANNEL B INPUT A
(18 ) AND P2 TO EOB ELECTRONICS DRAWER J22
(27).
9. CONNECT CURRENT PROBE TIP TO LOOP IN
SHORTING PLUG 13083962-559. NOTE:
CURRENT PROBE TIP ARROW MUST POINT TO
SAME DIRECTION AS SHORTING PLUG ARROW.
PRESS PROCEED WHEN COMPLETE.
(23) 1. DISCONNECT CURRENT PROBE TIP
FROM LOOP IN SHORTING PLUG 13083962-559.
2. DISCONNECT AC POWER CORD PLUG OF
POWER SUPPLY FROM E/O BENCH A2A4J3 (26).
3. DISCONNECT DC POWER INPUT OF CURRENT
PROBE AMPLIFIER FROM DC POWER OUTPUT OF
POWER SUPPLY FOR TYPE 134 (015-0058-01).
4. DISCONNECT BNC CONNECTOR OF AC
CURRENT PROBE P6021 FROM CURRENT PROBE
AMPLIFIER.
5. DISCONNECT CURRENT PROBE AMPLIFIER
TYPE 134 FROM PROGRAMMABLE DIGITIZER A2A1
CHANNEL A INPUT B (17). PRESS PROCEED
WHEN COMPLETE.
(24) 1. DISCONNECT P1 OF CABLE
13081706 FROM A2A2J3 AND DISCONNECT P2 0F
CABLE 13081706 FROM A1A1J8 (24).
2. DISCONNECT P13 OF CABLE 13083701 FROM
DIGITIZER A2A1 CHANNEL A INPUT A (16).
3. DISCONNECT P1 OF CABLE 13081706 FROM
DIGITIZER CHANNEL B INPUT A AND P2 FROM
EOB ELECTRONICS DRAWER J22 (27). PRESS
PROCEED WHEN COMPLETE.
Change 4
2-142.11
