TM 11-6625-3081-23
2-17. OPERATOR INSTRUCTION MESSAGES (cont)
2-17
(9) DISCONNECT SELF -TEST CONNECTOR
13083962-529 FROM P6 OF CABLE 13083701.
PRESS PROCEED WHEN COMPLETE.
(10) CONNECT P13 OF CABLE 13083701 TO
PROGRAMMABLE DIGITIZER A2A1 CHANNEL A
INPUT A (16), CONNECT P11 OF CABLE
13083701 TO PROGRAMMABLE DIGITIZER A2A1
CHANNEL A INPUT B (17). CONNECT P17 OF
CABLE 13083701 TO PR0GRAMMABLE DIGITIZER
A2A1 CHANNEL B INPUT A (18). CONNECT P9
OF CABLE 13083701 TO PROGRAMMABLE
DIGITIZER A2A1 CHANNEL B INPUT B (19).
PRESS PROCEED WHEN COMPLETE.
(11) DISCONNECT P13 OF CABLE 13083701
FROM PR0GRAMMABLE DIGITIZER A2A1 CHANNEL
A INPUT A (16). DISCONNECT P11 OF CABLE
13083701 FROM PROGRAMMABLE DIGITIZER A2A1
CHANNEL A INPUT B (17). DISCONNECT P17
OF CABLE 13083701 FROM PROGRAMMABLE
DIGITIZER A2A1 CHANNEL B INPUT A (18).
DISCONNECT P9 OF CABLE 13083701 FROM
PROGRAMMABLE DIGITIZER A2A1 CHANNEL B
INPUT B (19).
DISCONNECT SELF-TEST
CONNECT0R 13083962-519 FROM P2 OF CABLE
13230911 AND DISCONNECT CABLE 13230911
FROM A1A1J3 (14).
PRESS PROCEED WHEN
COMPLETE.
(12) OPEN DOOR ON MAJOR ADAPTER.
INSTALL P1 OF PROGRAMMABLE RESISTOR CARD
13083641 IN MAJOR TEST ADAPTER CONNECTOR
A6 (2). CLOSE AND SECURE DOOR ON MAJOR
ADAPTER.
PRESS PROCEED WHEN COMPLETE.
2-142.6
Change 5
