TM 11-6625-3081-23
2-14. MODULE DESCRIPTIONS (cont)
2-14
e. COMMON MODULES (cont)
Input Code
AUGTEM
2-86
Change 4
Description
The dayside test bench temperature sensors 1 and 3 are checked
for 17.0° to 29.0°C and recorded. The two indications are
compared for a difference of -2.5° to +2.5°C. The indications
are displayed.
If the indications are not within limits, a prompt is
displayed.
The nightside test bench thermal source controller ambient
temperature sensor is checked for a 17.0° to 29.0°C indication.
The indication is recorded and used as a base for other
nightside test bench sensor tests.
If the indication is not within limits, a prompt is displayed,
and a 22°C ambient temperature assumed in all other tests.
The A source is programmed to ambient and the A auxiliary-
temperature sensor checked for an indication from -5.0° to
+lO.O°C of the recorded ambient temperature indication.
If the indication is not within limits, a prompt is displayed.
The B source is programmed to ambient and the B auxiliary
temperature sensor is checked for an indication from -5.0° to
+10.O°C of the recorded ambient indication.
If the indication is not within limits, a prompt is displayed.
The C source is programmed to ambient, and the C auxiliary
temperature sensor checked for an indication from -5.0° to
+10.O°C of the recorded ambient temperature.
If the indication is not within limits, a prompt is displayed.
The A source is programmed to ambient and the A controller
temperature sensor checked for an indication from -5.0° to
+10.0°C of the recorded ambient temperature.
If the indication is not within limits, a prompt is displayed.
