TM 11-6625-3081-23
7-9. CABLE ASSEMBLY (TARGET LAMP) 2A1A2A11W19
7 -9
INPUT CODE:
DCDCTL (cont)
c .
DAY COLLIMATOR TARGET LAMP FAILURE
1. VDT DISPLAY
PERFORM THE FOLLOWING REPLACE ACTIONS IN THE ORDER LISTED. (REFERENCE
TM 11-6625-3081-23 FOR REPLACEMENT PROCEDURES.)
REF. DES.
PART NO.
NAME
1. 2A2A6XX
HP69331B
DIGITAL OUTPUT CCA (SLOT 409)
2. 2A2A7A4
13081572
RELAY ASSY.
3. 2A2A4A1
13083063
RELAY ASSY.
4. 2A1A2A11W19
13082266
CABLE ASSY. W19 (LAMP)
5. 2A1
13082800-59
DAYSIDE TEST BENCH
2. CORRECTIVE ACTION - DCDCTL
(a) Remove Digital Output CCA 2A2A6XX.
Check contacts of mating connectors
and repair if required.
Install replacement 2A2A6XX and perform DCDCTL
test.
If DCDCTL test passes, no further action required.
If DCDCTL
test fails, proceed to (b).
(b) Remove Relay Assembly 2A2A7A4.
Check contacts of mating connectors and
repair if required.
Install replacement 2A2A7A4 and perform DCDCTL
test.
If DCDCTL test passes, no further action required.
If DCDCTL
test fails, proceed to (c).
(c) Remove Relay Assembly 2A2A4A1.
Check contacts of mating connectors and
repair if required.
Install replacement 2A2A4A1 and perform DCDCTL
test.
If DCDCTL test passes, no further action required.
If DCDCTL
test fails, proceed to (d).
(d) Remove Cable Assembly 2A1A2A11W19.
Check contacts of mating connectors
and repair if required.
Install replacement 2A1A2A11W19 and perform
DCDCTL test.
If DCDCTL test passes, no further action required. If
DCDCTL test fails, proceed to (e).
7-46
