TM 11-6625-3081-23
7-34. SHUTTER ASSEMBLY 2A3A1A2
7-34
INPUT CODE: FIRCSST
a. DESCRIPTION
This module tests the ability of shutter assembly 2A3A1A2 to respond to position
input commands.
The nightside test bench is cleared and the shutter assembly
sensors checked for position 2 (closed).
If the sensors indicate position 1 (open), a prompt is displayed at the
completion of the test.
The shutter assembly is then programed to open and the sensor checked for
position 1.
If the sensors indicate position 2, a prompt is displayed at the completion of
the test.
The shutter assembly is then programmed to close and the sensors checked for
position 2.
If the sensors indicate position 1, a prompt is displayed at the completion of
the test.
b. REPLACEMENT PROCEDURE REFERENCE
The following list provides a cross reference of replacement items to
replacement procedures.
The item column identifies the item to be replaced by
reference designation and part number.
The reference column identifies the
procedural paragraph used to perform the replacement action. The VDT screen will
display the proper sequence of repair/replace actions.
Item
(Ref Des/Part No.)
Reference
(Para No.)
2A2A6XX (SLOT 403)/13083412
2-49
2A2A6XX (SLOT 408)/69331B
2-49
2A2A6XX (SLOT 410)/69331B
2-49
2A2A7A4/13081572
5-34
2A3/13082782-49
5-36
7-176
