TM 11-6625-3081-23
7-33. HEAT SOURCE TARGET ASSEMBLY 2A3A1A1 - TARGET
7-33
INPUT CODE: FIRCTGST (cont)
2. CORRECTIVE ACTION - FIRCTGST (cont)
(f) Remove Cable Assembly 2A3A1A1W13.
Check contacts of mating connectors
and repair if required.
Install replacement 2A3A1A1W13 and perform
FIRCTGST test.
If FIRCTGST test passes, no further action required.
If FIRCTGST test fails, proceed to (g).
(g) Remove Cable Assembly 2A3A1A1W17.
Check contacts of mating connectors
and repair if required.
Install replacement 2A3A1A1W17 and perform
FIRCTGST test.
If FIRCTGST test passes, no further action required.
If FIRCTGST test fails, proceed to (h).
(h) Remove Cable Assembly 2A3A1A1W16.
Check contacts of mating connectors
and repair if required.
Install replacement 2A3A1A1W16 and perform
FIRCTGST test.
If FIRCTGST test passes, no further action required.
If FIRCTGST test fails, proceed to (i).
(i) Remove Belt 2A3A1A1XX.
Check contacts of mating connectors and repair
if required.
Install replacement 2A3A1A1XX and perform FIRCTGST test.
If FIRCTGST test passes, no further action required.
If FIRCTGST test
fails, proceed to (j).
(j) Remove Clutch Drive Pully Assembly 2A3A1A1XX. Check contacts of mating
connectors and repair if required.
Install replacement 2A3A1A1XX and
perform FIRCTGST test.
If FIRCTGST test passes, no further action
required.
If FIRCTGST test fails, proceed to (k).
(k) Check the following cable assemblies and repair as required:
W8
W12
2A2W8
2A2W9
2A2W13
2A2W17
If any cable was repaired, perform FIRCTGST test. If FIRCTGST test
passes, no further action required.
If FIRCTGST test fails and CALCST,
PLLBUS, MTRXSW, ADST DIGITST, FPSST, and PPSST tests have been
performed, repair is beyond this level of maintenance. Next higher
level of maintenance required.
If no cables were repaired and CALCST, PLLBUS, MTRXSW, ADST, DIGITST,
FPSST, and PPSST tests have been performed, repair is beyond this level
of maintenance.
Next higher level of maintenance required.
7-175
