TM 11-6625-3081-23
6-10.
OPTICAL-HOD AND IVD ALIGNMENT ASSEMBLY REPAIR (cont)
6-10
c.
Remove two screws (7), washers
(8), nuts (9), and yoke load coil
assembly (6).
INSTALLATION
d.
Prepare two screws (7) for
application of zinc chromate
primer (para 2-19).
e.
Apply a thin coat of zinc
chromate primer on two screw
threads.
f.
Install in reverse order of
removal.
END OF TASK
6.
WIRING AND CONNECTOR
REPAIR/REPLACEMENT
Repair or replace wires and
connectors using standard maintenance
practices.
For wire list data refer
to paragraph 3-34.
END OF TASK
6-28
