TM 11-6625-3081-23
6-10. OPTICAL-HOD AND IVD ALIGNMENT ASSEMBLY REPAIR (cont)
6-10
c.
Remove three screws (7) and
washers (8).
d.
Remove six screws (9), washers
(10), and bracket and circuit
card assembly.
INSTALLATION
e.
Prepare six screws (9) for
application of zinc chromate
primer (para 2-19).
f.
Apply a thin coat of zinc
chromate primer on three screw
threads.
g.
Install in reverse order of
removal.
END OF TASK
5.
YOKE LOAD COIL ASSEMBLY REPLACEMENT
REMOVAL
a.
Remove 12 screws (1), washers
(2), and cover (3).
b.
Disconnect P7 (4) from A3J1 (5)
on yoke load coil assembly (6).
Change 6
6-27
