TM 11-6625-3081-23
5-34. ELECTRONICS DRAWER ASSEMBLY 2A2A7 REPAIR (cont)
5-34
do Remove leads from resistor (11)
and remove two screws (12),
lockwashers (13), washers (14))
and resistor (11).
e.
Remove leads from microcircuit
(15) and remove two nuts (16),
washers (17), insulating discs
(18), insulating plate (19),
terminal lug (20), screws (21),
and microcircuit (15).
INSTALLATION
f.
Install in reverse order of
removal.
END OF TASK
4. RESISTOR 2A2A7R1 REPLACEMENT
REMOVAL
a.
Remove eight screws (1), lock-
washers (2), washers (3), and
pull out electronics drawer
assembly (4).
b. Locate resistor R1 (5) on left
side of electronics drawer.
c.
Tag and remove leads from
resistor R1.
d.
Remove two screws (6), four
washers (7), two lockwashers (8),
two nuts (9), and resistor R1
(5).
INSTALLATION
e.
Install in reverse order of
removal.
END OF TASK
5-155
