TM 11-6625-3081-23
5-18. OPTICAL SIGNAL ANALYZER PHOTON EMITTER ASSEMBLY 2A1A1A3
5-18
REPLACEMENT
INITIAL SETUP
Equipment Condition
Materials (appendix C)
Power removed (para 2-24.1)
Lens paper (Item 36)
Applicable Configuration
Masking tape (Item 43)
E/O Bench Serial No. 00001 thru
Personnel Required
00105
39B ATE Repairer
REMOVAL
1.
2.
3.
4.
Open access door (1).
Remove four screws (2) and washers
(3) that secure photon emitter assem-
bly (4) to baffle cover (5).
Lift photon emitter assembly (4) and
disconnect connector W14P1 from
connector A3J1 (6).
Cover opening in baffle cover with
lens paper and secure with masking
tape.
INSTALLATION
5.
Install in reverse order of removal.
END OF TASK
5-92
Change 4
