TM 11-6625-3081-23
5-9.
DAYSIDE TEST BENCH 2A1 REPLACEMENT (cont)
5-9
’15. Using two persons, jack up base so
tie bars (28) and (5) can be inserted
between tiedown lugs (24) and (1) at
top of dayside test bench.
16. On rear of dayside test bench install
tie bar (28) with bolt (25) two
washers (26), and nuts (27).
17. On front of dayside test bench
install tie bar (5) with bolt (2),
two washers (3), and nut (4).
Torque bolts (2) and (25) to
50 ft-lb.
18. Lower base and remove jacks (31).
19. On front of dayside test bench
install retainer bracket (6) with
three screws (12) and washers (13).
Be sure bracket is positioned against
flats on washers. Torque screws
(12) to 50 ft-lb.
20. Install stud (11) into base.
21. Install protective cup (10) with tw
screws (7), lockwashers (8), and
washers (9).
22. On rear of dayside test bench,
install retainer bracket (16) with
three screws (22) and washers (23).
Be sure bracket is positioned against
flats of washers. Torque screws
(22) to 50ft-lb.
23. Install stud (21) into base.
24. Install protective cup (20) with two
screws (17), lockwashers (18),
washers (19).
END OF TASK
5-49
