TM 11-6625-3081-23
5-9. DAYSIDE TEST BENCH 2A1 REPLACEMENT (cont)
5-9
INSTALLATION
10. Position dayside test bench over base
assembly and install two bolts (14)
and washers (15) through base at
front.
11. Install two bolts (29) and washers
(30) through base at rear.
12. Remove rolalifts from dayside test
bench.
13. Torque bolts (29) and (14) to
60 ft-lb.
14. Position two jacks (31) under cent
of base.
position jack levers (32)
to the up position and insert jack
handles (33).
5-48