INSTALLATION - TM-11-6625-3081-23-4

REMOVAL - TM-11-6625-3081-23-4_99

INSTALLATION (cont) - TM-11-6625-3081-23-4_101

TM-11-6625-3081-23-4 Electronic Equipment Test Facility TADS/PNVS Augmentation Equipment Manual
Page Navigation
52

TM 11-6625-3081-23 5-6. BASE ASSEMBLY REPAIR (cont) 5-6 INSTALLATION (9) Remove two screws (12) and valve cover (13) from replacement valve (14) and install on defective valve (9). (10) Install valve cover (11) with adjusting arm on replacement valve (14) with two screws (12). (11) Wrap teflon tape around threads of fittings (3 and 5). (12) Install tee fittings (3 and 5) into replacement valve (14). ISOPROPYL ALCOHOL FLAMMABLE, TOXIC, IRRITATING. CAN CAUSE BREATHING PROBLEMS, EYE DAMAGE. DON’T: USE NEAR FLAMES OR SPARKS, LET IT GET IN EYES, OR BREATHE VAPORS. DO: USE IN WELL-VENTILATED AREA, CLOSE CONTAINERS WHEN NOT USING. WEAR ACID-TYPE SAFETY GOGGLES. IF IT CONTACTS EYES, WASH EYES WITH RUNNING WATER. GET MEDICAL HELP AT ONCE. IF YOU EXPERIENCE ANY BREATHING PROBLEMS, GET TO FRESH AIR AT ONCE. (13) Clean screws (8) and mating holes in isolator (1) with isopropyl alcohol. (14) Apply sealing compound primer to threads, allow to dry. 5-35

Privacy Statement
Press Release
Contact