TM 11-6625-3081-23
2-59. SWITCH CONTROLLER ASSEMBLY 2A2A12 REPAIR
2-59
This task covers replacement of:
Para
Item
1. Fuse
2.
Circuit card assembly (CCA)
INITIAL SETUP
Tools
Conductive
Conductive
Personnel Required
39B ATE Repairer
wrist strap
Equipment Condition
workbench mat
Power removed (para 2-24.1)
Materials (appendix C)
Electrostatic shielding bag (Item 7)
1. FUSE REPLACEMENT
NOTE
This procedure is used to replace any
of three fuses in switch controller
assembly.
REMOVAL
a.
Remove four screws (1), lock-
washers (2), washers (3), and
pull out switch controller
assembly (4).
b.
Remove fuse on rear panel of
switch controller assembly as
follows:
(1) On rear panel, locate fuse-
holder cap (5) and remove by
turning counterclockwise.
(2) Remove defective fuse (6).
Change 2
2-299
