TM 11-6625-3081-23
2-17. OPERATOR INSTRUCTION MESSAGES (cont)
2-17
(126) ENTER HI TEST POINT:
(136) ENTER LO TEST POINT:
Enter the high test point number to
Enter the low test point number to be
be measured, then press <RETURN>.
measured, then press <RETURN>.
(127) ENTER LO TEST POINT:
(137) VOLTAGE IS ###. ####### V P-P DC.
Enter the low test point number to
16 - MEASURE RESISTANCE
be measured, then press <RETURN>.
(128) VOLTAGE IS ###. ####### VRMS.
(138) ENTER HI TEST POINT:
Enter the high test point number to be
13 - MEASURE PEAK VOLTAGE
measured, then press <RETURN>.
(129) ENTER HI TEST POINT:
(139) ENTER LO TEST POINT:
Enter the high test point number to
Enter the low test point number to be
be measured, then press <RETURN>.
measured, then press <RETURN>.
(130) ENTER LO TEST POINT:
(140) RESISTANCE IS ######. ### OHMS.
Enter the low test point number to
(141)
be measured, then press <RETURN>.
========================
(131) MAX PEAK IS ###.####### V
=========
EOB MAINTENANCE MENU ========
MIN PEAK IS ###.####### V
====================
= 1) MULTIPROGRAMMER 10) CID CAMERAS =
14 - MEASURE PEAK TO PEAK (AC)
=
DIG IN/OUT
11) MULTIPRO- =
= 2) READ TEMPERATURE
GRAMMER
=
(132) ENTER HI TEST POINT:
=
SENSORS
RELAYS
= 3) TEMPERATURE
12) MP QUAD DACS=
Enter the high test point number to
=
CONTROLLER
13) SHUTTERS =
be measured, then press <RETURN>.
= 4) MOTORS
14) PROG. PULSE =
= 5) PROGRAMMABLE
(133) ENTER LO TEST POINT:
GENERATOR =
=
POWER SUPPLIES
15) VIDEO SIGNAL=
= 6) A/D) CONVERTER
GENERATOR =
Enter the low test point number to
= 7) DIGITIZER
16) CALCULATE =
be measured, then press <RETURN>.
= 8) MATRIX SWITCH
FUNCTIONS =
= 9) PARALLEL PLUS
17)
EQUATE
=
(134) VOLTAGE IS ###. ####### V P-P.
=
FUNCTIONS =
=
99) EXIT
=
15. MEASURE PEAK TO PEAK (DC)
====================================
(135) ENTER HI TEST POINT:
ENTER CHOICE:
Enter the high test point number to be
EXIT (99)
measured, then press <RETURN>.
(142) EOB maintenance COMPLETE
2-142.56
Change 9
