TM 11-6625-3081-23
2-17.
OPERATOR INSTRUCTION MESSAGES (cont)
2-17
(93) PULSE, ARMGATE
Test program ARMS THE PPG gate
counters.
(94)
====================
-----------
=========== EOB MAINTENANCE MENU ========
=====================
MULTIPROGRAMMER
10) CID CAMERAS =
DIG IN/OUT
11) MULTIPRO- =
READ TEMPERATURE
GRAMMER
=
SENSORS
RELAYS
TEMPERATURE
12) MP QUAD DACS=
CONTROLLER
13) SHUTTERS =
MOTORS
14) PROG. PULSE =
PROGRAMMABLE
GENERATOR =
POWER SUPPLIES
15) VIDEO SIGNAL=
A/D CONVERTER
GENERATOR =
DIGITIZER
16) CALCULATE =
MATRIX SWITCH
FUNCTIONS =
PARALLEL PLUS
17)
EQUATE
=
FUNCTIONS =
99) EXIT
=
=================================
ENTER CHOICE:
VIDEO SIGNAL GENERATOR (15)
(95) PROGRAM VIDEO SIGNAL GENERATOR:
1 - 525 LINE RATE
2 - 875 LINE RATE (TCLOCK =0)
3 - CAMERA VIDEO LEVEL
4 - BRIGHTNESS
5 - BLANKING LEVEL
6 - FREQUENCY, SINE LEVEL, PHASE
7 - WINDOW PARAMETERS
8 - 875 LINE RATE (TCLOCK =1)
9 - RETURN TO MAIN MENU
ENTER CHOICE:
1 - 525 LINE RATE
Test program enables video sync,
camera sync output, trigger output, and
camera video output at the 525 line rate,
and enables display windows 1, 2, and 3.
2 - 875 LINE RATE
Test program enables camera video
sync, camera sync output, trigger output,
and camera video output at the 875 line
rate, and enables display windows 1, 2,
and 3.
3 - CAMERA VIDEO LEVEL
(96) ENTER VIDEO LEVEL (O-5 VDC):
Enter desired video level, then press
<RETURN>.
Test program sets camera video level
to desired voltage.
4 - BRIGHTNESS
(97) ENTER BRIGHTNESS (O-2 VDC):
Enter desired brightness voltage,
then press <RETURN>.
Test program sets camera brightness
level to desired voltage.
5 - BLANKING LEVEL
(98) ENTER BLANKING LEVEL (0-0.5 VDC):
Enter desired blanking level voltage,
then press <RETURN>.
Test program sets camera blanking
level to desired voltage.
6 - FREQUENCY, SINE LEVEL, PHASE
(99) ENTER FREQUENCY IN MHZ
(0,2,4,8,10):
Enter desired frequency, then press
<RETURN>.
2-142.52
Change 9
