TM 11-6625-3081-23
2-14. MODULE DESCRIPTIONS (cont)
2-14
b. DAYSIDE TEST BENCH 2A1 (cont)
Input Code
DCBMIR
DCDCTL
Description
This module tests the ability of the B mirror to respond to com-
mands for positions 1 thru 3.
The B mirror is programed to
position 1 and motor status checked.
A prompt is displayed at the completion of the test if the motor
position is in error.
The B mirror is then programmed from position 1 to position 2
and motor status checked.
A prompt is displayed at the completion of the test if the motor
status is in error.
The B mirror is then programmed from position 2 to position 3
and motor status checked.
A prompt is displayed if the motor status is in error.
This module tests the ability of cable assembly (target lamp)
2A1A2A11W19 to respond to on and off commands. The target lamp
is programmed on and shutter assembly 2A1A2A2 opens.
The
operator observes the lamp by looking through the open shutter
and if lamp is on, presses [YES] or if lamp is off, presses [NO]
on the AN/USM-410 VDT.
If NO is pressed, a prompt is displayed at the completion of the
test.
The target lamp is then programmed off. The operator observes
the lamp through the open shutter and if lamp is on, presses
[YES] or if lamp is off, presses [NO] on the AN/USM-410 VDT.
If YES is pressed, a prompt is displayed.
Change 18
2-67
