TM 11-6625-3081-23
5-27. HARNESS ASSEMBLY REPAIR (cont)
5-27
h.
Install fan assembly (3) using
four screws (2).
i.
Install CCAA5 (1).
j.
Install bottom assembly cover
(para 5-26 task 1).
END OF TASK
3.
CONNECTOR XA1O OR XA11 REPLACEMENT
NOTE
This procedure can be used to replace
connector XA1O or XA11.
REMOVAL
a.
Remove bottom assembly cover
(para 5-26 task 1).
b.
Remove CCA A5 (1) using card
extractor.
c.
Remove fan assembly (3) by
removing four screws (2) and
lifting from housing.
d.
Loosen four captive
screws (4).
e.
Remove eight screws (5) and
remove CCA cage (6).
f.
Disconnect faulty connector by
loosening two screwlocks (7).
Connector XA1O (9)
Connector XA11 (8)
g.
Remove faulty connector from
wiring harness.
5-122
Change 9