TM 11-6625-3081-23
5-17. OPTICAL SIGNAL ANALYZER INTERFACE ASSEMBLY 2A1A1A8 REPLACEMENT
5-17
INITIAL SETUP
Tool/Special Tool
Socket, 5/32 hex head
drive
Personnel Required
396 ATE Repairer
Equipment Condition
power removed (para 2-24.1)
ball end, 1/4
Applicable Configuration
E/O Bench Serial No. 00001 thru
00105
REMOVAL
3.
Disconnect connector W11P1 from
connector A8J1 (4).
1.
Open access door (1).
4.
Remove four screws (5), washers (6),
2.
Remove two screws (2) securing relay
and interface assembly (7).
assembly (3) to mounting plate.
Move
relay assembly aside to gain access
to interface assembly.
5-90
Change 4