TM 11-6625-3081-23
5-6. BASE ASSEMBLY REPAIR (cont)
5-6
(4)
(5)
Note location of tee fitting
(4) and elbow fitting (5)
and remove from valve (2).
Clean teflon tape residue
from threads.
Remove two screws (6) and
valve cover assembly (7)
from valve (2).
INSTALLATION
(6) Remove two screws (8) and
valve cover (9) from
replacement valve (10) and
install on defective
valve (2).
(7) Install valve cover (7) with
adjusting arm on replacement
valve (10) with two
screws (8).
(8) Wrap teflon tape around
threads of fittings
(1 and 2).
(9) Install fittings (4 and 5)
into replacement valve (10).
5-37