TM 11-6625-3081-23
7-12. CID VIDEO CAMERA (INTERNAL CAMERA) 2A1A2A1A1A15
7-12
INPUT CODE: DCINTCAM (cont)
c. SEGMENT 1
1. VDT DISPLAY
PERFORM THE FOLLOWING REPLACE ACTION IN THE ORDER LISTED. (REFERENCE
TM 11-6625-3081-23 FOR REPLACEMENT PROCEDURES.)
REF. DES.
PART NO.
NAME
1. 2A2A7A6A5
13082717
FIFO CCA
2. 2A2A7A6A7
13082714
BUS MUX CCA
3. 1A11A9
13081742
INTERFACE CCA
4. 2A2A7A3
13083700-2
CAMERA CONTROLLER
5. 2A1A2A11W19
13082266
CABLE ASSY. W19 (LAMP DSI)
6. 2A1
13082800-59
DAYSIDE TEST BENCH
2. CORRECTIVE ACTION - SEGMENT 1
(a) Remove FIFO CCA 2A2A7A6A5.
Check contacts of mating connectors and
repair if required.
Install replacement 2A2A7A6A5 and perform DCINTCAM
test.
If DCINTCAM test passes, no further action required.
If this
segment displayed again, proceed to (b). If another segment displayed,
proceed to that segment and continue troubleshooting.
(b) Remove BUS MUX CCA 2A2A7A6A7.
Check contacts of mating connectors and
repair if required.
Install replacement 2A2A7A6A7 and perform DCINTCAM
test.
If DCINTCAM test passes, no further action required.
If this
segment displayed again, proceed to (c). If another segment displayed,
proceed to that segment and continue troubleshooting.
(c) Remove Interface CCA 1A11A9.
Check contacts of mating connectors and
repair if required.
Install replacement 1A11A9 and perform DCINTCAM
test.
If DCINTCAM test passes, no further action required.
If this
segment displayed again, proceed to (d). If another segment displayed,
proceed to that segment and continue troubleshooting.
(d) Remove Camera Controller 2A2A7A3.
Check contacts of mating connectors
and repair if required.
Install replacement 2A2A7A3 and perform
DCINTCAM test.
If DCINTCAM test passes, no further action required.
If this segment displayed again, proceed to (e). If another segment
displayed, proceed to that segment and continue troubleshooting.
7-55
