TM 11-6625-3081-23
7-6. A MIRROR
7 - 6
INPUT CODE: DCAMIR
a . D E S C R I P T I ON
This module tests the ability of the A mirror to respond to commands for both
positions 1 and 2. The A mirror is programmed to position 1 and the motor status
checked.
A prompt is displayed at the completion of the test if motor status is in error.
The A mirror is then programmed to position 2 and motor status checked.
A prompt is displayed at the completion of the test if the motor status is in
error.
The A mirror is then programed from position 2 to position 1 and the motor
status checked.
A prompt is displayed if the motor status is in error.
b. REPLACEMENT PROCEDURE REFERENCE
The following list provides a cross reference of replacement items to replace-
ment procedures.
The item column identifies the item to be replaced by reference
designation and part number.
The reference column identifies the procedural para-
graph used to perform the replacement action.
The VDT screen will display the pro-
per sequence of repair/replace actions.
Item
Reference
(Ref Des/Part No.)
(Para No.)
2A1/13082800-59
5-9
2A2A6XX (SLOT 401)/13083412
2-49
2A2A6XX (SLOT 407)/69331B
2-49
2A2A7A6A1/13082741
2-51
2A2A7A6A2/13082735
2-51
2A2A7A6A3/13082732
2-51
7-32