TM 11-6625-3081-23
7-23. SHUTTER ASSEMBLY 2A1A2A2
7 - 23
INPUT CODE : DCDCS
a. DESCRIPTION
This module tests the ability of shutter assembly 2A1A2A2 to respond to open and
close commands.
The dayside test bench is cleared and the shutter assembly sensors
checked for position 2 (closed).
If the sensors indicate position 1 (open), a prompt is displayed at the
completion of the test.
The shutter assembly is then programmed to open, and the shutter assembly
sensors checked for position 1.
If the sensors indicate position 2, a prompt is displayed at the completion of
the test.
The shutter assembly is then programmed to close, and the shutter assembly
sensors checked for position 2.
If the sensors indicate position 1, a prompt is displayed.
b. REPLACEMENT PROCEDURE REFERENCE
The following list provides a cross reference of replacement items to
replacement procedures.
The item column identifies the item to be replaced by
reference designation and part number.
The reference column identifies the
procedural paragraph used to perform the replacement action. The VDT screen will
display the proper sequence of repair/replace actions.
Item
Reference
(Ref Des/Part No.)
(Para No.)
2A1/13082800-59
5-9
2A2A6XX (SLOT 402)/13083412
2-49
2A2A6XX (SLOT 409)/69331B
2-49
2A2A7A4/13081572
5-34
7-111
