TM 11-6625-3081-23
5-39 SECONDARY HEAT SOURCE ASSEMBLY 2A3A1A17 REPAIR (cont)
5-39
INSTALLATION
1.
Apply a coat of thermal grease to
surface of microcircuit and heat
sink assembly that mates with
heat source (2).
CAUTION
When installing microcircuit and heat
sink assembly ensure cable follows
rotation of heat sink.
m.
n.
o.
p.
Install microcircuit and heat
sink assembly (16) on replacement
heat source assembly (2), tighten
finger-tight plus one-quarter
turn.
Position mounting bracket (12) on
heat source assembly (2), and
secure with four screws (10) and
lockwashers (11).
Position opposite mounting
bracket (15) on heat source
assembly (2) and secure with
eight screws (13) and
lockwashers (14).
Position folding mirror assembly
(6) on heat source assembly (2)
and install four screws (9).
5-185
