TM 11-6625-3081-23
5-37. PNEUMATIC CONTROL PANEL REPAIR (cont)
5-37
b.
On bottom of filter, push valve
(3) up to bleed off air pressure.
c.
Tag and remove air lines (4) from
regulator (5) and toggle
valve (6).
d.
e.
f.
g.
Remove three nuts (7), lock-
washers (8), washers (9), and
screws (10) securing control
panel bracket (11) to cover
plate.
Remove bracket.
Remove nut (12) securing toggle
valve to bracket.
Remove nut (13) securing
regulator to bracket.
Remove
bracket.
Unscrew regulator from nipple
(14).
Remove regulator.
INSTALLATION
h.
Remove teflon tape residue from
nipple threads and wrap with
teflon tape.
CAUTION
Do not use wrench on tubing nuts.
Finger tighten only.
i.
Install regulator in reverse
order of removal.
END OF TASK
5-164
