TM 11-6625-3081-23
2-64.
NIGHTSIDE TEST BENCH CABINET REPAIR (cont)
2-64
c.
Remove 14 screws (8) and washers
(9).
Note location of large
screws.
d.
Remove six screws (10) from
A3A1A15 connector bracket (11)
and remove access cover (12).
e.
Disconnect the following cables:
2A3A1W4P2 from connector J1 (13)
2A3A1W3P1 from connector J2 (14)
f.
Remove 16 screws (15), washers
(16), and access cover (17).
g.
Remove 12 screws (18), washers
(19), and access cover (20).
h.
Remove eight screws (21), washers
(22), and access cover (23).
Note location of two short screws
(24).
i.
Remove 12 screws (25), washers
(26), and pull out access cover
(27) and disconnect connector
W6P16 from fan connector P1 (28).
j. Remove 14 screws (29), washers
(30), and access cover (31).
INSTALLATION
k.
Install access cover in reverse
order of removal.
END OF TASK
2-316
Change 6
