TM 11-6625-3081-23
2-50. ELECTRONICS DRAWER ASSEMBLY 2A2A7 REPLACEMENT (cont)
2-50
5.
6.
6.1
7.
8.
9.
On bottom of electronics drawer
assembly, remove three screws (24),
lockwashers (25), washers (26), and
cable clamps (27).
Cut lacing tape as required and
remove the following cables from
electronics drawer assembly:
115 vac cords (28)
W15P1
(29)
W24P1
(30)
W10P2
(31)
W16P3
(32)
W30P1
(33)
Remove CCA A8 and A9 from
electronics drawer (para 2-51).
Locate ground lead (34) between CCA
A8 and A9.
Remove nut (35), lock-
washer (36), washer (37), screw
(38), and ground lead (34).
Remove nut (39), lockwashers (40),
two washers (41), screw (42), and
chain (43).
WARNING
HEAVY OBJECT
l EXCESSIVE STRAIN CAN CAUSE
SERIOUS INJURY.
l DON’T:
ATTEMPT TO LIFT OR CARRY
HEAVY OBJECTS ALONE.
l DO:
GET HELP FOR LIFTING OR
CARRYING OBJECTS WEIGHING MORE
THAN 35 POUNDS.
l IF YOU EXPERIENCE A SUDDEN PAIN
WHILE LIFTING OR DISCOMFORT AFTER
LIFTING, GET MEDICAL HELP AT
ONCE .
Using a person on each side of
electronics drawer assembly (1),
depress slide locks (44) and remove
electronics drawer assembly from
cabinet.
INSTALLATION
10. Install in reverse order of removal.
END OF TASK
2-279
