TM 11-6625-3081-23
2-17. OPERATOR INSTRUCTION MESSAGES (cont)
2-17
(6) 1. CONNECT P1 OF CABLE 13083701
TO MAJOR TEST ADAPTER J2.
2. CONNECT P2 OF CABLE 13083701 TO
MAJOR TEST ADAPTER J3.
3. CONNECT P3 OF CABLE 13083701 TO
0SA A1A1J2.
PRESS PROCEED WHEN
COMPLETE.
(7) CONNECT SELF-TEST CONNECTOR
13083962-519 TO P1 OF CABLE 13081941-19
INSIDE OSA.
CONNECT SELF-TEST CONNECTOR 13083962-529
TO P6 OF CABLE 13083701.
PRESS PROCEED WHEN COMPLETE.
(8) CONNECT P1 OF CABLE 13081706-69
TO PI U STATION A9J2. CONNECT P2 OF CABLE
13081706-69 TO OSA A1A1J17. PRESS
PROCEED WHEN COMPLETE.
(9) DISCONNECT P1 OF CABLE
13081706-69 FROM PIU STATION A9J2.
DISCONNECT P2 OF CABLE 13081706-69 FROM
OSA A1A1J17.
PRESS PROCEED WHEN
COMPLETE.
(10) DISCONNECT SELF-TEST CONNECTOR
13083962-529 FROM P6 0F CABLE 13083701.
PRESS PROCEED WHEN COMPLETE.
(11) CONNECT P13 OF CABLE 13083701 TO
PROGRAMMABLE DIGITIZER A2A1 CHANNEL A
INPUT A (12).
CONNECTOR P11 OF CABLE 13083701 TO
PROGRAMMABLE DIGITIZER A2A1 CHANNEL A
INPUT B (13).
CONNECT P17 OF CABLE 13073701 TO
PROGRAMMABLE DIGITIZER A2A1 CHANNEL B
INPUT A (14).
CONNECT P9 OF CABLE 13083701 TO
PROGRAMMABLE DIGITIZER A2A1 CHANNEL B
INPUT B (15).
PRESS PROCEED WHEN
COMPLETE.
(12) DISCONNECT ALL EXTERNAL CABLES,
EQUIPMENT, AND SELF-TEST CONNECTORS OTHER
THAN CABLE ASSEMBLY 13082730 AND MAJOR
TEST ADAPTER 13083633-19. IF THIS IS
YOUR LAST TEST, DISCONNECT ALL EXTERNAL
CABLES, EQUIPMENT, SELF-TEST CONNECTORS
AND ADAPTERS.
Change 4
2-141
