TM 11-6625-3081-23
2-17. OPERATOR INSTRUCTION MESSAGES (cont)
2-17
3. DISCONNECT P7 OF CABLE 13083701 FROM
J4 (18) OF OPTICAL ALIGNMENT ASSEMBLY
13083078-39.
4. DISCONNECT SELF-TEST CONNECTOR
13083962-559 FROM P4 (19) OF OPTICAL
ALIGNMENT ASSEMBLY CABLE 13083078.
PRESS PROCEED WHEN COMPLETE.
(26) OPEN OSA ASSEMBLY A1A1 DOOR
(13). CONNECT P2 OF OSA CABLE
13081941-19 TO OSA TEE CONNECTOR A1A1J14
(14). NOTE:
TEE CONNECTOR IS LOCATED IN
LOWER-LEFT FRONT CORNER. CLOSE OSA A1A1
DOOR (13).
PRESS PROCEED WHEN COMPLETE.
(27) DISCONNECT ALL EXTERNAL CABLES,
EQUIPMENT, SELF-TEST CONNECTORS OTHER
THAN CABLE ASSEMBLY 13082730 AND MAJOR
TEST ADAPTER 13083633-19. IF THIS IS
YOUR LAST TEST, DISCONNECT ALL
EXTERNAL CABLES, EQUIPMENT, SELF-TEST
CONNECTORS, AND ADAPTERS.
2-128.6
Change 4
