TM 11-6625-3081-23
2-17. OPERATOR INSTRUCTION MESSAGES (cont)
2-17
(7) INSERT OTHER END OF FIBER OPTICS
ASSEMBLY 13083098 INTO ADAPTER ON OSA
ASSEMBLY DOOR 2A1A1 (9).
(8) TURN KNOB (10) ON ILLUMINATOR
FULLY COUNTERCLOCKWISE AND PRESS POWER
SWITCH (11) TO ON.
PRESS PROCEED WHEN
COMPLETE.
(9) YOUR PRESENT VOLTAGE READING IS
#.## VOLTS. YOUR TARGET VOLTAGE IS 8.00
VOLTS.
USING THE VARIABLE CONTROL KNOB
(11) ON THE FRONT OF THE ILLUMINATOR,
ADJUST TO OBTAIN THE TARGET VOLTAGE.
(CLOCKWISE TO INCREASE, COUNTERCLOCKWISE
TO DECREASE.) PRESS <YES> TO TAKE
ANOTHER READING.
PRESS <NO> TO CONTINUE
(PMT WILL FAIL).
(10) DISCONNECT ALL EXTERNAL CABLES,
EQUIPMENT, AND SELF-TEST CONNECTORS OTHER
THAN CABLE ASSEMBLY 13082730 AND MAJOR
TEST ADAPTER 13083633-19. IF THIS IS
YOUR LAST TEST, DISCONNECT ALL EXTERNAL
CABLES, EQUIPMENT, SELF-TEST CONNECTORS,
AND ADAPTERS.
Change 3
2-123
