TM 11-6625-3081-23
5-38. HEAT SOURCE TARGET ASSEMBLY 2A3A1A1 REPAIR (cont)
5-38
q.
Position access cover (26), and
u.
Position bracket (14) and secure
secure with six long screws (23),
with three screws (12) and
two short screws (24), and
washers (13).
washers (25).
v.
position right side panel (11)
r.
Position access cover (21) on
and secure with eight screws (9)
nightside test bench, and secure
and washers (10).
with 14 screws (19) and
washers (20).
w.
Position rear panel (8) on night-
side cabinet and secure with
s.
Install six screws (21) into
eight screws (6) and washers
connector bracket A3A1A15.
(7).
t.
Connect the following connectors:
W4P1 to J1 (15)
W4P3 to J2 (16)
W1P1 to J3 (17)
W2P1 to J4 (18)
5-171