TM 11-6625-3081-23
5-36.
NIGHTSIDE TEST BENCH 2A3 REPLACEMENT (cont)
5-36
6. On retainer bracket (14) remove two
screws (15), lockwashers (16),
washers (17), Protective cup (18)s
and stud (19).
7.
On base of nightside test bench,
remove three screws (20), washers
(21), and bracket (14).
8. On base of nightside test bench,
remove two bolts (22), and washers
(23).
9. Nightside test bench is now ready
for movement. Refer to
TM 11-6625-3085-30.
INSTALLATION
10. Position nightside test bench over
base and install two bolts (12) and
washers (13) on front and two bolts
(22) and washers (23) at rear-
11. Remove rolalift from nightside test
bench.
CAUTION
Do not use wrench on pneumatic tubing
nuts.
Finger tighten only.
12. Install nightside test bench in
reverse order of removal starting
with step 7 except omit step 5.
13. Use torque values as listed below.
Itern
Torque
7
50 ft-lb
12
60 ft-lb
20
50 ft-lb
22
60 ft-lb
END OF TASK
5-161