TM 11-6625-3081-23
5-36. NIGHTSIDE TEST BENCH 2A3 REPLACEMENT (cont)
5-36
REMOVAL
1. On retainer bracket (1) remove two
screws (2), lockwashers (3), washers
(4), protective cup (5), and
stud (6).
2. On front of nightside test bench,
remove three screws (7), washers (8),
and retainer bracket (1).
TO PREVENT INJURY TO PERSONNEL,
PNEUMATIC PRESSURE SHOULD BE OFF AND
SYSTEM BLED DOWN PRIOR TO PERFORMING
THE FOLLOWING STEP.
NOTE
Be sure tubing nuts are secured after
disconnecting pneumatic lines.
3. Open access door (9) and disconnect
four pneumatic lines (10); orange,
blue, yellow, and clear. Be sure
lines are free from bench.
4.
Disconnect main pneumatic supply
line (11).
Be sure line is free from
bench.
5. On front of nightside test bench,
remove two bolts (12), and washers
(13).
5-160