TM 11-6625-3081-23
5-30. TEST CONSOLE TEST BENCH 2A2 REPLACEMENT (cont)
5-30
REMOVAL
1. On front tiedown lug (1), remove bolt
(2), two washers (3), nut (4), and
tie bar (5).
2. On base of test console test bench,
remove two bolts (6) and washers
(7).
3. Check that all slide mounted assem-
blies are properly secured in test
bench.
4. On nightside test bench (8) open
access door (9). On underside of
bench top loosen four screws (10),
rotate four retainers (11), and
remove bench top (12).
5. On rear tiedown lug (13), remove bolt
(14), two washers (15), nut (16), and
tie bar (17).
6.
On base of test console test bench,
remove two bolts (18), and
washers (19).
5-132