TM 11-6625-3081-23
5-30. TEST CONSOLE TEST BENCH 2A2 REPLACEMENT (cont)
5-30
13. Using two persons jack up base so tie
bars (5) and (17) can be inserted
between tiedown lugs (1) and (13) at
top of test console test bench.
DO NOT PLACE FINGERS BETWEEN TIEDOWN
LUGS WHEN INSTALLING TIE BARS,
SERIOUS INJURY COULD RESULT IF
FINGERS BECOME PINCHED.
14. On rear of test console test bench
install tie bar (17) with bolt (14),
two washers (15), and nut (16).
15. On front of test console test bench
install tie bar (5) with bolt (2),
two washers (3), and nut (4).
Torque bolts (2) and (14) to
50 ft-lb.
16. Lower base and remove jacks.
17. On nightside test bench (8) open
access door (9).
Install bench top
(12).
On underside, rotate four
retainers (11) and tighten four
screws (10).
18. Close access door (9).
END OF TASK
5-134