TM 11-6625-3081-23
2-73.
DISC/TAPE DRIVE STORAGE AND SHIPMENT PROCEDURES (cont)
2-73
2.
PREPARATION FOR SHIPMENT OR
STORAGE
a.
Remove front panel (1) from disc/
tape drive assembly by grasping
sides and pulling cover off.
b.
Remove four screws (2), lock-
washers (3), and washers (4).
c.
Pull out disc drive assembly
until actuator lock and spindle
lock are accessible.
d.
Lock actuator by moving actuator
lock lever (5) to SHIP.
e.
Loosen screw (6) and move spindle
lock lever (7) to SHIP.
f.
Tighten screw (6) to 20 in-lb.
g.
Slide disc/tape drive assembly
into cabinet.
h.
Install four washers (4), lock-
washers (3), and screws (2).
i.
Install front panel (1).
END OF TASK
2-328
Change 4