TM 11-6625-3081-23
1-10.
DESCRIPTION OF ELECTRONIC STATION (cont)
1-10
k.2.
DIGITAL COMPUTER ASSEMBLY 1A11
(1) Digital computer assembly 1A11 (Hewlett Packard HP1OOO A900) consists of a
computer chassis assembly, CCAs Al thru A13, drawer slides, and jumper assembly
ground lead.
(2) Computer chassis assembly consists of a 20 slot card cage, power supply,
fan panel, line filter, battery tray, and rear control panel. All CCAs are accessed
by removing the rear panel.
Each CCA slot is placarded from Al thru A20. Inside
the card cage is a backplane which contains an electrical interface for CCAS and
electronic components located in the front section of the computer chassis assembly.
The rear control panel contains an ac power connector, power switch, test point
connector, and ENABLE/DISABLE battery power switch.
The backup power source (which
includes the battery tray) is not provided for this configuration.
A 115 vac input
power line filter is located in the front section adjacent to the power supply. The
power supply is a two tier CCA positioned on card guides and plugged into the
backplane connector.
The fan panel containing four fans is located behind the front
panel .
A multi-connector cable assembly connects the power supply to each of four
fans.
Air flow is from front to rear at approximately 120 CFM per fan. The
louvered front panel contains a washable filter element.
(3) Digital computer assembly 1A11 contains 13 CCAs as follows:
1A11A1 Control Store
1A11A2 Sequencer
1A11A3 Data Path
1A11A4 Cache Control
1A11A5 Memory Controller
1A11A6 Memory
1A11A7 HP-IB Interface
1A11A8 Asynchronous Serial
Interface
1A11A9 IEEE Interface
1A11A1O Priority Jumper
1A11A11 HP-IB Interface
1A11A12 Parallel Interface
1A11A13 Buffer
Change 6
1-26.1/(1-26.2 blank)
(1-26.3 and 1-26.4 deleted)
