TM 11-6625-3081-23
2-40. DIGITAL COMPUTER ASSEMBLY 1A11 REPAIR (cont)
2-40
5. CABLE ASSEMBLY HP 12009-60007
REPLACEMENT
REMOVAL
a.
Open left rear cabinet door.
b. On rear panel of digital computer
assembly (1), loosen two screws
(2) and swing open left (3) and
right (4) panel doors.
c.
Disconnect the following
connectors:
P2 (5) from A3J1
HP-IB connector (6) from A6J2
P1 (7) from A5J1
P3 (8) from A11J1
d.
Close right and left panel doors.
e.
Remove HP 12009-60007 cable
assembly (9), by doing the
following steps:
(1) On cabinet structure (10),
remove screw (11), lock-
washer (12), washer (13),
and clamp (14).
(2) On cable carrier (15),
remove screws (16), lock-
washer (17), washers (18),
clamps (19), and nuts (20).
(3) Clip lacing tape (21) and
separate HP 12009-60007
cable assembly from rest of
cables (22).
(4) Clip lacing tape (21) from
connector bundle and remove
protective covering (23).
(5) Loosen two screws (24),
disconnect connector P1 (25)
from connector J1 (26), and
remove HP 12009-60007 cable
assembly.
INSTALLATION
f.
Install cable assembly in reverse
order of removal.
END OF TASK
Change 6
2-247
