TM 11-6625-3081-23
2-25.
ELECTRONIC STATION CABINET REPAIR (cont)
2-25
3. CABLE CARRIER REPLACEMENT
REMOVAL
NOTE
Electronic station uses seven iden-
tical cable carriers (l). Mounting
of one cable carrier is typical for
all.
a.
Open left or right rear cabinet
door.
b.
On cable carrier (1), do the
following, as required:
(1) Clip lacing tape (2).
(2) Remove screws (3), washers
(4), lockwashers (5), nuts
(6), cables (7), and cable
clamps (8).
(3) Remove screw (9), three
washers (10), two nuts (11),
cable clamp (8), and cable
chain (12).
c.
Remove two screws (13), lock-
washers (14), washers (15), and
defective cable carrier (1).
INSTALLATION
d.
Install in reverse order of
removal.
END OF TASK
Change 7
2-185
