TM 11-6625-3081-23
5-6. BASE ASSEMBLY REPAIR (cont)
5-6
CAUTION
A 10 inch x 10 inch x 0.25 inch plate
must be used under each jack or van
floor may be damaged.
(5) Position 10 inch x 10 inch
x 0.25 inch plates (10) next
to mounting plates (11) in
floor.
(6) Position jacks (12) under
edge of base assembly (6).
Be sure jacks are positioned
over mounting plates (11) in
floor and 10 inch x 10 inch
x 0.25 inch plate.
Do not
rest jacks on protruding
hardware.
(7) Position jack levers (13) up
and insert jack handles (14)
into jacks (12).
5-12