TM 11-6625-3081-23
4-5. BLOWER ASSEMBLY 1A6 OR 1A12 REPAIR (cont)
4-5
d.
Separate top cover (6) from bot-
tom half of blower housing (7) as
far as attached wiring permits.
Tag and cut three 115 vac power
e.
input cable wires (8) from three
lug nuts (9).
Remove lug nuts
from blower motor wires and
discard lug nuts.
f.
Separate blower motor assembly
(10) from bottom half of blower
housing (7).
f.1. Before disassembly of blower
assembly mark a line on motor
(20) near wires, brackets (11)
and (15), and fan housings (19)
and (25).
Use lines to aid in
reassembly of blower.
4-10